Aluminum die-casting mold is a kind of mold that can make aluminum die-casting products, so that the product specifications and dimensions produced are consistent. If some parts need to be replaced, we also have alternative products, but long-term use of the mold must be cleaned. I will introduce the cleaning trick to everyone.
Do you know how to clean aluminum die-casting molds? Yujiu shares tips
① Clean the mold with kerosene first to ensure that there are no aluminum slag dust and dirt at the right-angle groove holes and other places that are easy to trap dirt. The sliding parts such as parting surface, cavity, core pulling and mold appearance are clean as new.
②Then dry the mold with compressed air, especially to ensure that the position of the limit switch and plug is dry and free of oil accumulation.
③Carefully inspect all parts of the mold according to the fifth item 8-1 standard, and transfer the defective parts to the mold repair area for repair in time.
④ If the mold is hoisted to the maintenance area, apply anti-rust oil to the guide post, guide sleeve, cavity, parting surface and various sliding parts.
⑤ Hoist to the "Mold Storage Area" for fixed positioning and storage, and fill in the "Mold Handling Repair and Maintenance Card".
Clean the mold with corresponding tools, follow the top-down principle to remove all aluminum slag, oil, dust and other dirt on the mold. Be careful not to bump and scratch the cavity, core and other product parts.
This is about the cleaning method of aluminum die-casting molds. After I have introduced you, you should understand it! If you need die-casting molds, aluminum die-casting processing customization, you can contact us.
