Products
Aluminum LED Pendant Light Housing
Introduction
Led ceiling light housing is made for our Australian customer. We make both sand blasting and powder coating for our aluminum LED pendant light housing. The material to make our part is 7075. In general, it has round and square shapes. We can make any shapes according to your demand.
Features
Pendant Light, which is also called ceiling lamp is a kind of lamps and lanterns, as the name suggests, because the top of lamps and lanterns is relatively flat, the bottom of lamps and lanterns is completely pasted on the roof when they are installed, so it is called ceiling lamp. The light sources include ordinary white bulb, fluorescent lamp, high intensity gas discharge lamp, halogen tungsten lamp, led, etc.
At present, the most popular ceiling lamp in the market is led ceiling lamp, which is often used in home, office, entertainment and other places.
Product Description
Product name | Aluminum LED Pendant Light Housing |
Material | 7075 |
Size (Length*Width*Height) | 5.7*5.7*5cm |
Weight | 63.5g |
Surface finish | Sand blasting or powder coating |
Process | Die casting - Machining - Deburring - Sand blasting or powder coating |
Application | LED pendant light |
Customer | Serial No： | 201904074 | ||||||||||||||||||
Product | Lot No | Alloy And Temper | Dimension （mm） | |||||||||||||||||
7075 | 50*50*25 | |||||||||||||||||||
Technique Standard | GB/T3880-2012 | Composition Standard | GB/T3190-2008 | |||||||||||||||||
Chemical Composition % | ||||||||||||||||||||
Element | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |||||||||||
Standard | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | Remainder | |||||||||||
Actual | 0.4 | 0.5 | 1.35 | 0.3 | 2.77 | 0.25 | 5.59 | 0.2 | ||||||||||||
Mechanical Property | ||||||||||||||||||||
Sampling | Tensile Strength （MPa） | Yield Strength （MPa） | Elongation （%） | |||||||||||||||||
—— | Standard | Actual | Standard | Actual | Standard | Actual | ||||||||||||||
≥524 | 570 | ≥455 | 470 | ≥1.5 | 2.2 | |||||||||||||||
Cup Bulge | —— | —— | 90°bend | |||||||||||||||||
Earing（%） | —— | —— | Hardness | 150HB | ||||||||||||||||
Surface Control | Good | Dimension Control | Meet Standard | |||||||||||||||||
Hydrogen Content Standard Value （ml/100gAl） | —— | Hydrogen Content Actual Value （ml/100gAl） | —— | |||||||||||||||||
Note | ||||||||||||||||||||
Led Ceiling Lamp
Led ceiling lamp is a kind of lighting that is absorbed or embedded in the ceiling. Like the chandelier, it is also the main indoor lighting equipment. It is often used in various places such as home, office, entertainment and so on. Generally, led ceiling lamps with a diameter of about 200 mm are suitable for use in corridors and bathrooms, while those with a diameter of 400 mm should be installed on the top of a room of no less than 16 square meters. There are two kinds of LED ceiling lamps on the market: D-shaped tube and annular tube, and there are differences between large and small tubes. Three things to look at when buying led ceiling lamps. To see whether the product identification is complete, the identification of regular products is often more standardized, which should be marked: trademark and factory name, product model and specification, rated voltage, rated frequency and rated power. Second, check whether the power line of the lamp has CCC safety certification mark, and the cross-sectional area of the external wire should be greater than or equal to 0.75 square mm. Third, check whether the electrified body of the lamp is exposed. After the light source is installed in the lamp holder, fingers should not touch the electrified metal lamp cap.
 |  |
Our Company
Quanxing can make both die casting mold and product according to customers' design.
But different customers will have different requirements.
If you just need the mold, before making the mold, we can help you design the mold drawing according to your die casting machine and other requirements, and we will also send the 3D drawing of the mold to you to check it.
Our engineer has over 25 years experiences in manufacturing molds. So you can believe that we are very professional in this field.
If you also need the products, we also has our own machining workroom, some surface finish workroom and packing workroom to finish all the processes by ourselves.
In addition, after we make the mold for you, there is no any requirement for MOQ.
Mold Workroom
Die Casting Machine
Quality Inspection Certificate
We have ISO9001 and SGS Certificate for this aluminum ceiling lamp shade.
 |  |
Aluminum ceiling lamp housing is well packaged by bubble bag, carton, pallet. We We packed 10pcs aluminum ceiling lamp cover in our big bubble bag according to customer own demand. If customer want to pack their cargo in other way, we can also pack them same as customers requirement.
 |  |
| Bubble Bag | Carton |
 |
|
Package | Wood pallet and Container |
Transportation
According to customer’s demand, we send the aluminum ceiling light housing by air transport. And customers can also choose the other transports such as sea and train.
Express
 |  |  |
 |  |  |
| Sea transport | Air transport |
 |  |
Hot Tags: China aluminum led pendant light housing, aluminum led pendant light housing suppliers, aluminum led pendant light housing manufacturers, aluminum led pendant light housing factory, customized aluminum led pendant light housing, Small Aluminum Car Parts, Aluminum Die Casting Furniture Parts, Metal Cast LED Light Housing, High Quality Aluminium Die Casting Parts, Aluminum garden lamp shell, Aluminum Die Casting Automotive Parts
