Products
Aluminum Spotlight Housing
Overview
Our LED spotlight housing is made for our Canadian customer. The customer sent their samples to us, and we make the mold and product totally according to their samples. The surface finish for our aluminum spotlight housing is powder coating. The material for our aluminum spotlight housing is AlSi10Mg. It is mainly used for large-area operation sites and mines, building outlines, stadiums, overpasses, monuments, parks and flower beds, etc. Therefore, almost all large-area lighting fixtures used outdoors can be regarded as floodlights.
Features
Floodlights are lamps that specify that the illuminance on the illuminated surface is higher than that of the surrounding environment. Also known as spotlight. Generally, it can aim in any direction and has a structure that is not affected by climatic conditions. The angle of the projecting light beam is wide or narrow, and the range of variation is between 0° and 180°. Among them, the narrow beam is called a searchlight.
Product Description
Product name | Aluminum Spotlight Housing |
Material | AlSi10Mg |
Size (Length*Width*Height) | 25*25*30cm |
Weight | 1.55kg |
Surface finish | Powder coating |
Process | Die Casting - Machining - Deburring - Powder coating |
Application | Spotlight |
Product Description：
Customer | Serial No： | 200911048 | ||||||||||||||||||
Product | Lot No | Alloy And Temper | Dimension （mm） | |||||||||||||||||
AlSi10Mg | 50*50*25 | |||||||||||||||||||
Technique Standard | GB/T3880-2012 | Composition Standard | GB/T3190-2008 | |||||||||||||||||
Chemical Composition % | ||||||||||||||||||||
Element | Si | Mg | Mn | Cu | Fe | Ni | Zn | Sn | Al | |||||||||||
Standard | 8.0-10.5 | 0.17-0.35 | 0.2-0.5 | ≤0.3 | ≤0.9 | ≤0.15 | ≤0.25 | ≤0.01 | Remainder | |||||||||||
Actual | 8.7 | 0.25 | 0.22 | 0.19 | 0.88 | 0.11 | 0.14 | 0.009 | ||||||||||||
Mechanical Property | ||||||||||||||||||||
Sampling | Tensile Strength （MPa） | Yield Strength （MPa） | Elongation （%） | |||||||||||||||||
—— | Standard | Actual | Standard | Actual | Standard | Actual | ||||||||||||||
≥195 | 266 | —— | —— | ≥1.5 | 2.5 | |||||||||||||||
Cup Bulge | —— | —— | 90°bend | |||||||||||||||||
Earing（%） | —— | —— | Hardness | ≥65HB | ||||||||||||||||
Surface Control | Good | Dimension Control | Meet Standard | |||||||||||||||||
Hydrogen Content Standard Value （ml/100gAl） | —— | Hydrogen Content Actual Value （ml/100gAl） | —— | |||||||||||||||||
Note | ||||||||||||||||||||
Quality Inspection Certificate:
 |  |
Company Introduction：
Product material that can used for aluminum die casting:
USA Brand : A360,A380,A356,A383 ECT;
Europe Brand: EN-AC 46100,EN-AC 46000,EN-AC 47100 ECT;
Japan Brand: ADC12,ADC3,ADC5,ADC10 ECT;
Other all kinds of aluminum alloy as customer required.
Surface finish that can used for aluminum die casting products: Sandblasting, painting, powder coating, chrome plating, e-coating, anodizing.
Process Flow Chart:
Quanxing also has our own assembling workroom. Customer want us to send the complete spotlight to them by pallet, so they ask their other suppliers to send the accessories to our factory, then we help them to assemble all the parts with this aluminum reflector lamp housing that we made for them together. In the end, we send the complete spotlight by pallet.
 |  |
| Bubble bag | Carton |
 |
|
Package | Wood pallet and Container |
Transportation:
These aluminum reflector lamp cover are sent by sea transportation by our forwarder.
Sea transport
FAQ
1. Q: What are the differences between Quanxing with other supplier?
A: Profession and reliability.
Our advantages are multiple available technologies, strong quality assurance, and good at project & supply chain management.
2. Q: How to deal with the quality problem?
A:
A.Our factory must fully understand the quality concerns from customers and implement product & process quality requirements.
B.Our quality professionals who perform patrol inspection in our factories.
We perform final inspectors before the goods are packed.
C.We have 3rd party inspectors who perform final audit checks on the packed goods prior to dispatch from China.
3. Q: What is the application for spotlight?
A: LED spotlight are mainly used in single buildings, exterior wall lighting of historical buildings, interior and exterior lighting of buildings, indoor local lighting, green landscape lighting, billboard lighting, medical and cultural and other special facilities lighting, bars, dance halls and other entertainment venues Atmosphere lighting.
4. Q: What is the definition for LED spotlight?
A: LED project-light lamp (LED project-light lamp) is also called spotlight, projection lamp, spotlight, etc. It is mainly used for architectural decoration lighting and commercial space lighting. The decorative components are heavier, and its appearance is The round ones are also square ones, because the heat dissipation is generally considered, so their appearance is still somewhat different from traditional floodlights.
5. Q: What is the characteristics of LED spotlight?
A:
1. The commonly used LED spotlight on the market basically use 1W high-power LEDs (each LED element will have a high-efficiency lens made of PMMA, and its main function is to secondarily distribute the light emitted by the LED, which is two Secondary optics), a few companies have chosen 3W or higher power LEDs because of the good heat dissipation technology. It is suitable for large-scale occasions, lighting, buildings and other lighting.
2. Symmetrical narrow-angle, wide-angle and asymmetric light distribution systems.
3. The light bulb can be replaced with an open-back type, which is easy to maintain.
4. The lamps are all attached with a scale plate to facilitate the adjustment of the irradiation angle. Its main application places are probably these: single buildings, exterior wall lighting of historical buildings, building interior and exterior lighting, indoor local lighting, green landscape lighting, billboard lighting, medical and cultural and other specialized facility lighting, bars, dance halls, etc. Atmosphere lighting in entertainment venues and so on.
Hot Tags: China aluminum spotlight housing, aluminum spotlight housing suppliers, aluminum spotlight housing manufacturers, aluminum spotlight housing factory, customized aluminum spotlight housing, Aluminum Gravity Casting Automotive Parts, Zinc Die Casting Tooling, Aluminum Motorcycle Taillight Parts, Aluminum alloy polished hooks, Powder Coating Zinc Die Casting Parts, Aluminum Die Casting Hooks
