Aluminum Motorcycle Rear Parts

Introduction

High precision aluminum motorcycle parts are used for our Japanese customers. The aluminium motorcycle parts have powder coating surface finish, and the color is black. We use AlSi9Cu3 to our aluminum motorcycle rear parts. They are used in the fields of light and motorcycle, as the part of the whole product.

Features

With the powder coating surface treatment, which is a method for spraying plastic powder on parts. And it is also the electrostatic powder spraying coating we often talk about, our aluminum motorcycle rear parts has the advantages of this technology are embodied in advanced technology, energy saving, high efficiency, safety and reliability, and bright color. If you need, we can also make the it according to your RAL card number or the samples with the color that you need.

Product Specification

Powder Coating Flow Chart

Aluminum motorcycle trail lamp parts have powder coating surface finish, which makes product looks more beautiful and glossy.

Certificate

Package

Because aluminum motorcycle taillight parts are smaller than other products, and the customer is near than our factory, so we choose to pack each small aluminum motorcycle parts by bubble bag and carton directly. And ship the cargo by express.

Bubble Bag	Carton

Transportation

We usually send samples by express (Door to door), such as DHL, TNT, FedEx, UPS, EMS and so on. Batch goods shipments can be shipped by sea or by air or by train according to the customers own demand.

We send the aluminum motorcycle rear lamp parts by express that choose by Japanese customer.

Express

Sea transport	Air transport

FAQ

1. Q: How to place the order?

A:

1. Customers could send us your samples or drawings, such as PDF and 3D drawing with format of stp, step or igs.

2. Our engineers will check the drawing carefully and then provide you a good price.

3. If you accept, we will send PI to you for confirmation.

2. Q: Why your mold cost is higher?

A:

1. To be honestly, the mold cost that we quoted is very low.

We are making die casting mold as customers' design near 20years.

So you can believe that we are very good at making mold cost control.

And our mold price is below average in Ningbo.

As you know, our factory is located in Beilun, Ningbo, where is the die casting hometown in China.

2. We are very professional in mold design and manufacture, and our mold will have a good quality.

For the feed port and vent hole of the mold, both of them are well-designed.

The mold cavity is made through high precision CNC machining and highly polishing.

The mold core material is genuine H13 Steel.

So the mold lifetime will be much longer.

3. As you know, high quality mold is the foundation of high quality products.

If the mold quality is not good, it will have big influence to the product quality in the future, and the product cost will also accordingly increase.

4. Up to now, for our exported molds, our 100% customers are satisfied with it.

3. What is the differences between plating, electrophoresis, anodizing, powder coating and painting?

A:

1. Whether plating, electrophoresis, anodizing, powder coating and painting can be masked is different.

a. plating, electrophoresis, anodizing

Plating, electrophoresis, and anodizing are inconvenient to shield.

b. Powder coating and painting

Powder coating and painting can be masked

2. Whether plating, electrophoresis, anodizing, powder coating and painting can be treated differently.

a. Electrophoresis, anodizing

After electrophoresis and anodizing film formation, the surface insulation cannot be treated twice.

b. Plating, powder coating and painting

Plating, powder coating and painting can be repeated for many times.

3. The suitable materials for plating, electrophoresis, anodizing, powder coating and painting are different.

a Anodizing

Anodizing is only suitable for magnesium, aluminum and magnesium aluminum alloy.

b. Electrophoresis

Electrophoresis is suitable for all products with conductive surfaces.

c. Plating, powder coating, painting

Plating, powder coating and painting are suitable for almost all product surface treatments.

4. The advantages and disadvantages of plating, electrophoresis, anodizing, powder coating and painting are different.

a. Plating

Plating advantages: the coating has metallic luster, good hardness, and does not need to be heated for curing;

Disadvantages: heavy metal pollution is inevitable, the color is single, and the cost is high.

b. Electrophoresis

Electrophoresis advantages: water-based coatings are environmentally friendly, with high coating utilization, good corrosion resistance, high treatment efficiency, and low cost per unit area;

Disadvantages: The color is single and difficult to adjust at will. The equipment has a large investment in the early stage. It is only suitable for conductive products and requires high temperature curing.

c. Anodizing

Anodizing advantages: relatively simple manufacturing process, various bright colors can be made, and the cost is low;

Disadvantages: only suitable for magnesium and aluminum products.

d. Powder coating

Advantages of powder coating: environmentally friendly coatings, high utilization rate of coatings, can be used in various colors;

Disadvantages: thick film thickness, high temperature curing.

e. Painting

Advantages of painting: It can be processed in a variety of different colors, and various performance coatings are more selective;

Disadvantages: low utilization rate, less environmental protection, high fire hazard, and need to be a dust-free workshop.

Hot Tags: China aluminum motorcycle rear parts, aluminum motorcycle rear parts suppliers, aluminum motorcycle rear parts manufacturers, aluminum motorcycle rear parts factory, customized aluminum motorcycle rear parts, Aluminum Automotive Taillight Parts, Aluminum Light Housing, LED can light housing, Aluminum road light housing, Aluminum furniture parts hardware accessories, Aluminum Auto Parts