Products
Aluminum Auto Rear Parts
Introduction
Aluminum auto rear lamp parts are applied to aluminum automotive rear parts for our Netherlandish customers. Our products are used for light housing and heat sink for auto. The aluminum car rear lamp parts are made by high pressure die casting mold. The material for aluminum auto rear parts is ADC12. The surface finish for our products is white powder coating.
Features
The aluminum auto rear parts have the features of complexity, precision, light weight, and energy saving, which are very suit for being made by die casting process. Our products cater the trend of green environmental protection. As a metal thermal processing technology with less cutting and close to no cutting, the auto rear parts formed by die casting have light weight, strong wear resistance, high mechanical strength, good heat transfer and electrical conductivity, can withstand high temperatures, and have a beautiful appearance.
Product Specification
Product name | Aluminum Auto Rear Parts |
Material | ADC12 |
Size (Length*Width*Height) | 5*5*10cm |
Weight | 180g |
Surface finish | Powder coating |
Process | Die Casting - Machining - Deburring - Sand blasting |
Application | Auto rear |
Customer | Serial No： | 190520055 | ||||||||||||||||
Product | Lot No | Alloy And Temper | Dimension （mm） | |||||||||||||||
ADC12 | 50*60*30 | |||||||||||||||||
Technique Standard | JIS H5302 | Composition Standard | JIS H5302 | |||||||||||||||
Chemical Composition % | ||||||||||||||||||
Element | Si | Fe | Ti | Mg | Ni | Zn | Cu | Mn | Pb | Sn | Al | |||||||
Standard | 9.6-12 | ≤1.3 | ≤0.3 | ≤0.3 | ≤0.5 | ≤1 | 1.5-3.5 | ≤0.5 | ≤0.2 | ≤0.2 | Remainder | |||||||
Actual | 10.7 | 0.817 | 0.033 | 0.108 | 0.048 | 0.707 | 1.62 | 0.2 | <0.05 | <0.05 | ||||||||
Mechanical Property | ||||||||||||||||||
Sampling | Tensile Strength （MPa） | Yield Strength （MPa） | Elongation （%） | |||||||||||||||
—— | Standard | Actual | Standard | Actual | Standard | Actual | ||||||||||||
≥228 | 310 | ≥154 | 180 | ≥1.4 | 2.1 | |||||||||||||
Cup Bulge | —— | —— | 90°bend | |||||||||||||||
Earing（%） | —— | —— | Hardness | ≥74.1HB | ||||||||||||||
Surface Control | Good | Dimension Control | Meet Standard | |||||||||||||||
Hydrogen Content Standard Value （ml/100gAl） | —— | Hydrogen Content Actual Value （ml/100gAl） | —— | |||||||||||||||
ADC12 SGS Test Report
We have SGS report for aluminum ADC12 material that made for aluminum auto taillight parts.
Certificate
 |  |
Quality Control
We can also make control plan and FMEA to our customer if they need.
Control plan
FMEA
Package
As for packaging, we will use bubble bags to protect each aluminum car taillight parts. Several products are packed in a carton. If customer need to transport the cargo by sea, we will make a fumigation-free wooden pallet to hold the goods.If the cargo is easy to be damaged, we will add a clapboard to each carton, so that each product is placed separately and not easily damaged.
 |  |
| Bubble Bag | Carton |
 |
|
Load to Container | Pallet |
Transportation
Aluminum car trail lamp parts are sent by sea transport according to customer demand, which is much cheaper, but has long delivery time. If we just sent some samples to customer to check, we will choose express, which is more fast than others. If the cargo is large, we will choose air transport or sea transport. The air transport is more fast than sea transport, but the freight cost much high than sea transport.
Express
 |  |  |
 |  |  |
| Sea transport | Air transport |
 |  |
FAQ
1. Q: What is the die casting?
A: Die casting, the full name of pressure casting, is a metal casting process that uses a mold cavity to apply high pressure to the molten metal to solidify the molten metal to form a casting. Compared with other casting technologies, die-casting is the most widely used, fastest growing, most advanced and most efficient precision parts manufacturing technology. Many advantages such as energy saving and high efficiency have been widely used in precision electronic devices such as automobiles, home appliances, aviation, machinery and so on.
2. Q: What surface finish can we make for aluminum auto trail lamp parts?
A: We can make sand casting aluminum auto parts, powder coating aluminum auto parts, painting aluminum auto parts, electrophoresis aluminum auto parts, plating aluminum auto parts, polishing aluminum auto parts and other surface finish according to customers’ demand for their aluminum car rear parts.
Hot Tags: China aluminum auto rear parts, aluminum auto rear parts suppliers, aluminum auto rear parts manufacturers, aluminum auto rear parts factory, customized aluminum auto rear parts, Aluminum garden lighting housing accessories, Zinc Die Casting Panel Nuts, Zinc Die Casting Automotive Parts, Aluminum alloy balcony window frame, Aluminum Furniture Cabinet Handle Part, Aluminum Low Pressure Motorcycle Parts
