Products
Aluminum Die Casting Furniture Parts
Craft: High pressure die casting
Surface finish: Black Electroplate Painting /Powder Coating/Painting
Send Inquiry
Product Introduction
Product Introduction:
Product name: Aluminum Die Casting Furniture Parts
Material: Aluminum A380
Craft: High pressure die casting
Surface finish: Black Electroplate Painting /Powder Coating/Painting
Overview
Aluminum Die Casting Furniture Parts are used for cabinet handles, adjustable TV cabinet legs, table corners, chair legs, sofa legs ,aluminum die casting window parts,aluminum die casting powder coating parts,aluminum die casting chair parts,aluminum die casting table parts,aluminum die casting desk parts,aluminum die casting door parts and other metal accessories. The main material of our parts is A380, which is a highly mechanically hardened aluminum alloy.
Aluminum Die Casting Furniture Parts are not easy to rust, wear-resistant, anti-corrosion, lighter than iron and stainless steel. It is very convenient to move the furniture without adding too much weight. This product was designed by our Spanish customer and is currently very popular in the market.
Scope of application：
Cabinet door, wardrobe, shoe cabinet, cabinet, drawer, wine cabinet, living room, bedroom, bathroom, outdoor, commercial place, dining room.
Material Introduction:
A380 Aluminum Alloy is the most common special aluminum alloy, because it has the characteristics of easy casting mold, convenient machining and good heat conduction.The variant, the pressure bearing, and the high temperature splitting resistance are all very strong although the A380 has long been considered to be easy to process mechanically.It is widely used in a variety of products, including chassis for electrical equipment, engine mounts, transmissions, furniture, generators and hand tools.
A380 SGS Test Report:
Aluminum A380 Composition Test Report:
Customer | NINGBO FREE TRADE ZONE QUANXING MOULDING CO.,LTD | Serial No： | 20201012 | |||||||||||||||||
Product | Lot No | Alloy And | Dimension （mm） | |||||||||||||||||
Aluminum Light Bracket | 20-11 | A380 | 50*50*25 | |||||||||||||||||
Technique Standard | SAE J452-2003 | Composition Standard | SAE J452-2003 | |||||||||||||||||
Chemical Composition% | ||||||||||||||||||||
Element | Si | Mg | Mn | Cu | Fe | Ni | Zn | Sn | Al | |||||||||||
Standard | 7.5-9.5 | ≤0.10 | ≤0.5 | 3.0-4.0 | ≤1.3 | ≤0.5 | ≤3.0 | ≤0.35 | Remainder | |||||||||||
Actual | 9.2 | 0.08 | 0.3 | 3.2 | 1.2 | 0.4 | 0.25 | 0.3 | ||||||||||||
Mechanical Property | ||||||||||||||||||||
Sampling | Tensile Strength（MPa） | Yield Strength（MPa） | Elongation（%） | |||||||||||||||||
—— | Standard | Actual | Standard | Actual | Standard | Actual | ||||||||||||||
Longitudinal | ≥325 | 300 | ≥160 | 180 | ≥3.5 | 4 | ||||||||||||||
Cup Bulge | —— | —— | 90°bend | |||||||||||||||||
Earing（%） | —— | —— | Hardness | —— | ||||||||||||||||
Surface Control | Good | Dimension Control | Pass | |||||||||||||||||
Hydrogen Content Standard Value | —— | Hydrogen Content Actual Value（ml/100gAl） | —— | |||||||||||||||||
Note | ||||||||||||||||||||
Packing&Transportation:
As for packaging, we will use bubble bags to protect each product. Several products are packed in a two-layer carton.If you need to transport your goods by sea, we will make you a fumigation-free wooden pallet to hold your goods.If your goods are easy to be damaged, we will add a clapboard to each carton, so that each product is placed separately and not easily damaged.
We support EXW, FOB, CIF and so on.
We usually send samples by express(Door to door), such as DHL, TNT, FedEx, UPS, EMS and so on.
Batch goods shipments can be shipped by sea or by air or by land.
According to the customer's needs.
ABOUT US:
NINGBO FREE TRADE ZONE QUANXING MOULDING CO.,LTD
Where are we:
Near the Ningbo port:
Ningbo Port was formerly known as Ningbo Port Authority.
● So that our factory has a great export advantage
Our professional advantages
● Founded in 2008--Our factory has more than 12 years of experience in die casting.
● Factory Area-- 3000㎡
● Workers: 70
● R&D Team--Our engineers have more than 20 years of experience in die casting and can provide you with professional advice on die casting.
We can produce OEM custom-made parts according to your design and requirements.(like mold cavity, surface finish, packing etc.)
● Professional quality control system
1. Our factory get ISO certificate . Attachment is the certificate .
2. Quality inspection 4 times :
(1) Material incoming control : We ask our material supplier make material test report and checked .
(2) Inline inspection : we will make random inspection during production
(3) 100% inspection : making 100% inspection before packing .
(4) Final inspection : doing random inspection after products packed .
● Multiple detection method
The inspection tools in our factory include vernier caliper, plug gauge and CMM etc.
Multiple detection services can be provided, like salt spray test.
● Additional services that we can provide to our customers
We will make molds drawings or mold flow for our customer.
We can make CNC machining samples for you to check the design.
* Welcome your inquiry!
Hot Tags: China aluminum die casting furniture parts, aluminum die casting furniture parts suppliers, aluminum die casting furniture parts manufacturers, aluminum die casting furniture parts factory, customized aluminum die casting furniture parts, Aluminum alloy bathroom furniture door part, Aluminum Bicycle Frame Building Parts, LED Light Housing, Aluminum light housing fittings, Aluminum can light housing, High Quality Aluminum Automotive Parts
Previous:
Aluminum Furniture Handle Parts
Send Inquiry
